Toyota ZZT230 series, Repair Manual

Page: 604 / 821

)
Dl-393
DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
Squib
(LH)
-+ +-
Airbag
{J
Sensor
Assembly
�-�'·
ON
0
D
L
C
3
DTC 80118/46
�
��
CG Tc
H01017
H13044
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b)
Using a service wire, connect FL+ and FL-of the con nee-
tor {on the side airbag assembly side) between the side
airbag assembly (LH) and the airbag sensor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait
at
least
for
2
seconds.
CHECK:
(a) Turn the ignition switch to ON and wait at least for
20
se-
conds.
(b) Clear the OTC stored in memory
(See step
5
on page
Dl-326).
(c) Turn the ignition switch to LOCK, and wait at least for
20
seconds.
(d) Turn the ignition switch to ON, and wait at least for
20
se-
conds.
(e) Check the DTC (See page
Dl-326).
O
K
:
-
DTC
80118/46
Is not output.
HINT.
Codes other than code
80118/46
may
be
output at this time, but
they are not relevant to this check.
Replace
a
l
rb
a
g
sensor assembly.