Toyota ZZT230 series, Repair Manual

Page: 222 / 821

)
)
8
Check lor spark.
N
Dl-11
DIAGNOSTICS
-
ENGINE
Proceed to page SF-6 and continue to trouble-­
shoot.
PREPARATION:
(a) Disconnect the high-tension cord from the spark plug.
(b) Remove
the spark plug.
(c) Install the spark plug the high-tension cord.
(d) Disconnect the injector connector.
(e)
Ground the spark plug.
CHECK:
Check if
spark occurs while engine is being cranked.
NOTICE:
To prevent excess fuel being injected from the Injectors
during this test, don't crank the engine for more than
5 - 1 0
seconds at a time.
Proceed to page IG-1 and continue to trouble­
shoot.
Proceed to problem symptoms table on page
Dl-22.