Toyota ZZT230 series, Repair Manual

Page: 675 / 821

Dl-464
SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1
Prepare for Inspection (See step
1 on
page
Dl-471 )
.
0
2 Check wire harness (to B+ )
.
D
Airbag
[]::::[I):::::f
Sensor
Assembly Front Airbag
�
Sensor (lH) Airbag Sensor
"""'
AII0119
A
ss
e
mb
l
y
1-110072
CHECK:
(a) Turn the ignition switch to
ON.
(b)
For the connector (on the airbag sensor assembly side)
between the front airbag sensor
(LH)
and the airbag sen·
sor assembly, measure the voltage between body ground
and each
of
+SL and -SL.
OK:
Voltage: Below
1
V
3
Check wire harness (to ground).
Sensor
Airt>ag
Assembl
Front Airbag
Sensor (LH) Airbag
Sensor
Assembly
1-110973
CHECK:
For the connector (on the airbag sensor assembly side) be·
tween the front airbag sensor (LH) and the airbag sensor as­
sembly, measure the resistance between body ground and
each of +SL and
-BL.
OK: Resistance: 1 Mn
or
Higher
Go to
step 9.