Toyota ZZT230 series, Repair Manual

Page: 570 / 821

)
Dl-359
DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P squib.
P
Squib
Airbag
Sensor
Assembly
DLC3
DTC 80105/53
� =�
CG Tc
H10612
PREPARATION :
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
and walt at least for 90 seconds.
(c) Connect the front passenger airbag assembly connector.
(d) Connect negative (-) terminal cable to the battery, and
wait
at
least for 2 seconds.
CHECK:
(a) Turn the ignition switch to LOOK, and wait at least for 20
seconds.
(b) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(c) Clear lhe DTC slored in memory (See page Dl-326).
(d) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(e) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(f)
Check the DTC (See page Dl-326).
OK:
DTC
80105/53
Is
not output.
HINT:
Codes other than code 80105/53 may be output at this time, but
they are not relevant to this check.
Replace front passenger alrbag assembly.
From
the results of the above Inspection, the
malfunctioning part can now
be
c
o
n
s
ider
e
d
normal.
To
make
sure of
this,
use the
simulation method to check.