Toyota ZZT230 series, Repair Manual

Page: 560 / 821

)
)
Dl-349
DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
3
Check alrbag sensor assembly.
c:[J
Spiral
Cable
D
Squib
DLC3
��
CG
Tc
H0Ul02
H02144 AB01111
H10600wtr.!042
Airbag
Sensor
Assembly
-H-
DTC 801 02/11
H10605
PREPARATION:
(a)
Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect D+ and
D-
of the connector
(on the spiral cable side) between the spiral cable and the
steering wheel pad.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(b)
(c)
(d)
(e)
OK:
HINT:
Clear the DTC stored in memory
(See step
5
on page Dl-326).
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
Turn the ignition switch to ON, and wait at least for 20 se­
conds.
Check the DTC (See page Dl-326).
DTC
80102/11
is not output.
Codes other than code 60102/11 may be output at this time, but
they are not relevant to this check.
Replace alrbag sensor assembly.