Toyota ZZT230 series, Repair Manual

Page: 660 / 821

)
)
4 Check wire harness.
Door
Side Airbag
Airbag
Sensor
A embly
Airbag
t_o�_moJ
5
Check wire harness.
\J
Assembly
{)
Airbag
Dl-449
DIAGNOSTICS
-
SUPPLEMENTAL RESTRAINT
SYSTEM
CHECK:
For the connector (on the airbag sensor assembly side) be­
tween the door side airbag sensor
(LH)
and the airbag sensor
assembly, measure the resistance between DML+ and DM
L
-
.
OK:
Resistance: 1 M.Q or
Higher
PREPARATION:
Using a service wire, connect
DML+
and DML-of the connector
(on the door side airbag sensor
(LH)
side) between the airbag
sensor assembly and the door side airbag sensor
(LH).
CHECK:
For the connector (on the airbag sensor assembly side} be­
tween the door side airbag sensor
(LH)
and the airbag sensor
assembly, measure the resistance between OML+ and
DML-.
OK:
Resistance: Below 1 Q