Toyota ZZT230 series, Repair Manual

Page: 622 / 821

)
)
Dl-411
DIAGNOSTICS
-
SUPPLEMENTAL RESTRAINT SYSTEM
4 Check PIT
squib (LH).
Airbag
Sensor Ass
e
m
b
l
y
OLC3
DTC 80135173
w e;>
�
CG Tc
H01018
AB0119
HIOEIOO H0108$
H10628
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative
(-) terminal cable
from the battery,
and wait at least for 90 seconds.
(c) Connect the seat belt pretensioner
(LH)
connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn the ignition switch to LOOK, and wait at least for 20
second.
(b)
Turn
the ignition switch to ON, and wait at least for 20 se­
conds.
(c) Clear the DTC stored in memory (See page Dl-326).
(d) Turn the ignition switch to LOCK,
and
wait at least for 20
seconds.
(e) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(f)
Check the DTC (See page Dl-326).
OK:
DTC
80135/73
ts
not output.
HINT:
Codes other than code 80135173
may be
output at this time, but
they are not relevant to this check.
Replace seat belt pretensloner (LH).
From the results of the above Inspection, the malfunctioning part can now be considered normal.
To make sure
of
this, use the simulation method to check.