Toyota ZZT230 series, Repair Manual

Page: 647 / 821

Dl-436
DIAGNOSTICS
-
RESTRAINT SYSTEM
8 DTC 81141/33
out put
again?
Side
Airba
Sensor Assembly (LH)
DlC3
A i
rb
a
g
Sensor
--i +-
Assembly
DTC
81141/33
.c:>
CG
Tc
PREPARATION:
(a)
Connect the connector to the side airbag sensor assem·
bly (LH)-
(b)
Connect the connector to the airbag sensor assembly.
{c)
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn the ignition switch to ON, and wait at least for 20 se·
conds.
(b) Clear the DTC stored in memory
(See step
5
on page Dl--326).
(c)
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(e)
Check the DTC (See page Dl--326).
OK:
DTC 81141/33
Is not output.
HINT:
Codes other than code 81 141/33 may be output at this time, but
they are not relevant to this check.
G
Go to stop
9.
From
the
resuhs of the above Inspection, the malfunctioning part can now
be
considered normal.
To make sure
of
this, use the simulation method to check.