Toyota ZZT230 series, Repair Manual

Page: 640 / 821

)
)
Dl-429
DIAGNOSTICS
-
SUPPLEMENTAl RESTRAINT SYSTEM
9
Check alrbag sensor assembly.
irbag
Sensor Side
A
Assam bly (RH)
DLC3
CG Tc
li01012
Airbag
Sensor
Assembly
PREPARATION:
{a) Turn the ignition switch to LOCK.
(b)
Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c)
Disconnect the side airbag sensor (RH) from the connec­
tor and connect the side airbag sensor (LH) to the con­
nector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(b) Clear the DTC stored in memory
(See step 5 on page Dl-326).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d)
Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(e) Check the DTC (See page Dl-326).
OK:
DTC 81140/32 Is not output.
HINT:
Codes other than code 81140/32 may be output at this time, but
they are not relevant to this check.
Replace alrbag sensor assembly.