Toyota ZZT230 series, Repair Manual

Page: 657 / 821

-
SUPPLEMENTAL SYSTEM
Check RH front door
wire
harness.
Door Side Airbag
AH Fronl Door Wire
Se n
so
r (
A
H
)
�
D
Airbag
Q:::O Sensor
f- --+
Assembly
� �
DMC!:r
PREPARATION:
(a) Disconnect the RH front door wire harness connector on
the airbag sensor assembly side.
(b) Usi n g a service wire, connect DMR+ and DMR- of the
connector (on the RH front door wire harness side) be­
tween the RH front door wire harness and the door side
airbag sensor (RH).
CHECK:
For the connector (on the RH front door wire harness side) be­
tween the airbag sensor assembly and the RH front door wire
harness, measure the resistance between DMA+ and DMR-.
OK: Resistance: Below
1 !l
G
Repair or replace RH front door wire harness.
Repair or replace harness or connector between alrbag sensor assembly and RH front door wire
harness.