Toyota ZZT230 series, Repair Manual

Page: 575 / 821

Dl-$4
DJAGNOS11CS RESTRAINT SYSTEM
3
Check alrbag sensor assembly.
P
Squib
Airbag
c[]
::;
:
:
bly
0
ON
Code 90107/51
�"""
H02144
AB01t8
HIOOOO Hll107$
H10615
PREPARATION:
{a) Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect
P+
and
P-
of the connector
(on the front passenger airbag assembly side} between
the front passenger airbag assembly and the airbag sen­
sor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for
2
seconds.
CHECK:
(a) Turn the ignition switch to ON and wait at least for
20
se­
conds.
(b) Clear the OTC stored in memory
(See step
5
on page
Dl-326).
(c) Turn the ignition switch to LOCK, and wait at least for
20
seconds.
(d) Turn the ignition switch to ON, and wait at least for
20
s
e
­
conds.
(e) Check the DTC (See page
Dl-326).
OK: DTC
80107/51
Is not output.
HINT:
Codes other than code
80107/51
may be output at this time, but
they are not relevant to this check
Rep
l
a
c
e airbag sensor assembly.