Toyota ZZT230 series, Repair Manual

Page: 585 / 821

Dl-374
SUPPLEMENTAL
SYSTEM
3
Check alrbag sensor assembly.
Airbag
Squib
(RH)
Sensor
Assembly
(J -H-
F��R+
DLC3
CG Tc
ON
0
DTC 80111/44
PREPARATION:
(a} Connect the connector to the airbag sensor assembly.
{b) Using a service wire, connect FR+ and FR- of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (RH) and the airbag sensor assem­
bly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn the ignition switch to ON and wait at least for 20 se-
(b)
(c)
conds.
Clear the DTC stored in memory (See page Dl-326).
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(e)
OK:
HINT:
Check the DTC (See page 01-326).
DTC 80111/44
Is not output.
Codes other than code
80111/44
may be output at this time, but
they are not relevant to this check.
G
Replace alrbag sensor assembly.