Toyota ZZT230 series, Repair Manual

Page: 441 / 821

01430
-
9.
MANUAL SHIFTING
TEST
HINT:
With this test, it can be determined whether the trouble is within
the electrical circuit or is a mechanical problem in the transaxle.
(a) Disconnect the solenoid wire.
(b) Inspect the manual driving operation.
HINT:
Check that the shift and gear positions correspond with
the table below.
While driving, shift through the L, 2 and D positions.
Check that the gear change corresponds to the shift posi­
tion
Shift Position Gear Position
L
,
,
,
R
Reverse
p Pawl
lock
If the L, 2 and D position gear positions are difficult to positions
are difficult to distinguish, do the following read test.
If any abnormality is found in the above test, the problem is in
the transaxle itself.
(c) Connect the solenoid wire.
(d) Cancel oul DTC (See page Dl-220).