Toyota Camry 2004 Owner'S Manual Download Page 52

Page: 52 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

If your seat belts cannot be fastened se-

curely because they are not long enough,

a personalized seat belt extender is avail-
able from your Toyota dealer free of

charge.
Please contact your local Toyota dealer so
that the dealer can order the proper re-

quired length for the extender. Bring the

heaviest coat you expect to wear for prop-
er measurement and selection of length.

Additional ordering information is available

at your Toyota dealer.

CAUTION

When using the seat belt extender,
observe the following precautions.

Failure to follow these instructions

could reduce the effectiveness of the
seat belt restraint system in case of

an accident, increasing the chance of

personal injury.

Remember that the extender pro-

vided for you may not be safe when

used on a different vehicle, for
another person, or at a different

seating position than the one origi-

nally intended.

If the seat belt extender has been

connected to the driver’s seat belt

buckle without wearing the seat belt

when using the extender in the

driver’s seat, the SRS driver’s air-

bag system will judge that the driv-

er wears the seat belt even if not

wearing it. In this case, the driver’s

airbag may not activate correctly,

causing death or serious injury in

the event of collision. Be sure to

wear the seat belt with the seat belt

extender.

Make sure the “AIRBAG ON”

indicator light is illuminated when

using the seat belt extender for the

front passenger seat. If the

“AIRBAG OFF” indicator light is

illuminated, disconnect the extender

tongue from the seat belt buckle,

then reconnect the seat belt.

Reconnect the seat belt extender

after making sure the “AIRBAG ON”

indicator light is illuminated. If you

use the seat belt extender while the

“AIRBAG OFF” indicator light is

illuminated, the front passenger

airbag and side airbag on the front

passenger side may not activate

correctly, causing death or serious

injury in the event of collision.

Be sure to wear the seat belt with-

out the seat belt extender if you

can fasten the seat belt without the

extender.

—Seat belt extender

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands