Toyota Camry 2004 Owner'S Manual Download Page 172

Page: 172 / 330

’04Camry_U (L/O 0307)

171

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

If following another vehicle on a dusty

road, or driving in windy and dusty

conditions, it is recommended that the
air intake selector be temporarily set to

RECIRCULATE, which will close off the

outside passage and prevent outside
air and dust from entering the vehicle

interior.

Heating

For best results, set controls as follows:
For automatic operation—

Press in the “AUTO” button.
Temperature—

To the desired

temperature

Air intake—FRESH

(outside air)

Air conditioning—OFF

For manual operation—

Fan speed—

To the desired fan speed

Temperature—

Towards

WARM

Air intake—FRESH

(outside air)

Air flow—FLOOR
Air conditioning—OFF

For quick heating, select recirculated

air for a few minutes. To keep the
windows from fogging, select fresh af-

ter the vehicle interior has been war-

med.

Press the “A/C” button on for dehumidi-

fied heating.

Choose floor/windshield air flow to heat

the vehicle interior while defrosting or

defogging the windshield.

Air conditioning

For best results, set controls as follows:
For automatic operation—

Press in the “AUTO” button.
Temperature—

To the desired

temperature

Air intake—FRESH

(outside air)

Air conditioning—ON

For manual operation—

Fan speed—

To the desired fan speed

Temperature—

Towards

COLD

Air intake—FRESH

(outside air)

Air flow—PANEL
Air conditioning—ON

For quick cooling, select recirculated

air for a few minutes.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands