Toyota Camry 2004 Owner'S Manual Download Page 125

Page: 125 / 330

’04Camry_U (L/O 0307)

124

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

CAUTION

Never attempt to move the selector
lever into “P” position under any cir-

cumstances while the vehicle is mov-

ing. Serious mechanical damage and
loss of vehicle control may result.

If the automatic unlocking operation linked

with the shift position is set, all doors are
automatically unlocked when the selector

lever is moved to the “P” position with the

ignition switch is in the “ON” position. For
details, see “—Automatic door locking and

unlocking functions” on page 19 in Section

−

(h) Good driving practice

If the transmission repeatedly shifts up
and down between third gear and over-

drive when climbing a gentle slope, the

overdrive should be turned off. Be sure
to turn the switch on immediately after-

ward.

When towing a trailer, in order to main-

tain engine braking efficiency, do not

use overdrive.

CAUTION

Always keep your foot on the brake
pedal while stopped with the engine

running. This prevents the vehicle

from creeping.

NOTICE

Always use the brake pedal or the
parking brake to hold the vehicle on

an upgrade. Do not attempt to hold

the vehicle using the accelerator ped-
al, as this can cause the transmission

to overheat.

(i) If you cannot shift the selector le-

ver out of “P” position

If you cannot shift the selector lever from
“P” position even though the brake pedal

is depressed, use the shift lock override

button. For instructions, see “If you cannot
shift automatic transmission selector lever”

on page 258 in Section 4.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands