Toyota Camry 2004 Owner'S Manual Download Page 93

Page: 93 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

To change the steering wheel angle,

hold the steering wheel, push down the
lock release lever, tilt the steering

wheel to the desired angle and return

the lever to its original position.

CAUTION

Do not adjust the steering wheel
while the vehicle is moving. Doing

so may cause the driver to mishan-

dle the vehicle and an accident may
occur resulting in death or serious

injuries.

After adjusting the steering wheel,
try moving it up and down to make

sure it is locked in position.

To adjust the position of the accelerator

and brake pedals, push the switch.

The ignition key must be in the “ON” posi-

tion with the automatic transmission selec-

tor lever in the “P” position.
To move the pedals toward the front of

the vehicle: Push the “

” side of the

switch.

To move the pedals back toward you:

Push the “

” side of the switch.

The accelerator and brake pedals will

move simultaneously as long as you hold

the switch.

Tilt steering wheel

Power adjustable pedals

(some models with an

automatic transmission)

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands