Toyota Camry 2004 Owner'S Manual Download Page 136

Page: 136 / 330

’04Camry_U (L/O 0307)

135

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

The cruise control allows you to cruise

the vehicle at a desired speed over 40

km/h (25 mph) even with your foot off
the accelerator pedal.

Your cruising speed can be maintained up

or down grades within the limits of engine
performance, although a slight speed

change may occur when driving up or

down the grades. On steeper hills, a
greater speed change will occur so it is

better to drive without the cruise control.

CAUTION

To help maintain maximum control
of your vehicle, do not use the

cruise control when driving in

heavy or varying traffic, or on slip-
pery (rainy, icy or snow

−

covered) or

winding roads.

Avoid vehicle speed increases when
driving downhill. If the vehicle

speed is too fast in relation to the

cruise control set speed, cancel the
cruise control then downshift the

transmission to use engine braking

to slow down.

TURNING THE SYSTEM ON

To operate the cruise control, press the
“CRUISE ON

−

OFF” button. This turns the

system on. The indicator light in the
instrument panel shows that you can now

set the vehicle at a desired cruising

speed. Another press will turn the system
completely off.

CAUTION

To avoid accidental cruise control en-
gagement, keep the “CRUISE ON

−

OFF” switch off when not using the

cruise control.

SETTING AT A DESIRED SPEED

On vehicles with automatic transmission,
the transmission must be in “D” before

you set the cruise control speed.
Bring your vehicle to the desired speed,

push the lever down in the “SET/COAST”

direction and release it. This sets the ve-
hicle at that speed. If the speed is not

satisfactory, tap the lever up for a faster

speed, or tap it down for a slower speed.
Each tap changes the set speed by 1.6

km/h (1.0 mph). You can now take your

foot off the accelerator pedal.

Cruise control

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands