Toyota Camry 2004 Owner'S Manual Download Page 284

Page: 284 / 330

’04Camry_U (L/O 0307)

283

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

When the level reaches within the correct

range, install the filler cap hand

−

tight.

Oil quantity, L (qt., lmp. qt.):

2AZ

−

FE engine

1.0 (1.1, 0.9)

1MZ

−

FE and 3MZ

−

FE engines

1.5 (1.6, 1.3)

NOTICE

Be careful not to spill the engine
oil on the vehicle components.

Avoid overfilling, or the engine

could be damaged.

Check the oil level on the dipstick

once again after adding the oil.

ENGINE OIL SELECTION

“Toyota Genuine Motor Oil” is filled in

your Toyota vehicle. Use Toyota approved
“Toyota Genuine Motor Oil” or equivalent

to satisfy the following grade and

viscosity.
Oil grade:

API grade SL “Energy

−

Conserving” or

ILSAC multigrade engine oil

Recommended viscosity:

SAE 5W

−

Outside temperature

SAE 5W

−

30 is the best choice for good

fuel economy and good starting in cold
weather.
If SAE 5W

−

30 is not available, SAE

10W

−

30 may be used. However, it

should be replaced with SAE 5W

−

30 at

the next oil change.

API service symbol

ILSAC certification mark

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands