Toyota Camry 2004 Owner'S Manual Download Page 48

Page: 48 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

When a passenger’s shoulder belt is com-

pletely extended and is then retracted

even slightly, the belt is locked in that
position and cannot be extended. This fea-

ture is used to hold the child restraint

system securely. (For details, see “Child
restraint” on page 74 in this Section.) To

free the belt again, fully retract the belt

and then pull the belt out once more.
If the seat belt cannot be pulled out of the

retractor, firmly pull the belt and release

it. You will then be able to smoothly pull
the belt out of the retractor.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the belt is not twisted.

Do not insert coins, clips, etc. in
the buckle as this may prevent you

from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your
Toyota dealer. Do not use the seat

until the seat belt is fixed, because

it cannot protect an adult occupant
or your child from injury.

Keep as low on

hips as possible

Take up

slack

Too high

Adjust the position of the lap and

shoulder belts.

Position the lap belt as low as possible

on your hips—not on your waist, then ad-
just it to a snug fit by pulling the shoulder

portion upward through the latch plate.

CAUTION

Both high

−

positioned lap belts and

loose

−

fitting belts could cause seri-

ous injuries due to sliding under

the lap belt during a collision or
other unintended event. Keep the

lap belt positioned as low on hips

as possible.

Do not place the shoulder belt un-

der your arm.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands