Toyota Camry 2004 Owner'S Manual Download Page 213

Page: 213 / 330

’04Camry_U (L/O 0307)

212

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

7. “TUBELESS” or “TUBE

TYPE”—

A tubeless tire does not

have a tube inside the tire and air

is directly filled in the tire. A tube

type tire has a tube inside the tire

and the tube maintains the air

pressure.

8. Load limit at maximum cold tire

inflation pressure—

For details,

see “Checking and replacing tires”

on page 290.

9. Maximum cold tire inflation

pressure—

This means the pres-

sure to which a tire may be in-

flated. For details about recom-

mended cold tire inflation

pressure, see “Tires” on page 312.

10.Summer tire or all season

tire—

An all season tire has “M+S”

on the sidewall. The tire not

marked with “M+S” is a summer

tire. For details, see “Types of

tires” on page 222.

This illustration indicates typical DOT

and Tire Identification Number (TIN).

1. “DOT” symbol
2. Tire Identification Number (TIN)
3. Tire manufacturer’s identification

mark

4. Tire size code
5. Manufacturer’s optional tire type

code

6. Manufacturing week
7. Manufacturing year

The “DOT” symbol certifies that the

tire conforms to applicable Federal

Motor Vehicle Safety Standards.

—DOT and Tire Identification

Number (TIN)

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands