Toyota Camry 2004 Owner'S Manual Download Page 114

Page: 114 / 330

’04Camry_U (L/O 0307)

113

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

(a) Brake System Warning Light

This light comes on in the following cases

when the ignition key is in the “ON” posi-
tion.

When the parking brake is applied...

Vehicles with anti

−

lock brake system—

This light comes on for a few seconds
when the ignition key is turned to the

“ON” position even after the parking brake

is released.

When the brake fluid level is low...

CAUTION

It is dangerous to continue driving
normally when the brake fluid level is

low.

Have your vehicle checked at your

Toyota dealer in the following cases:

The light does not come on even if the

parking brake is applied when the igni-

tion key is in the “ON” position.

Vehicles with anti

−

lock brake system—

The light does not come on even if the
ignition key is turned on with the park-

ing brake released.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If either of the following conditions
occurs, immediately stop your vehicle

at a safe place and contact your

Toyota dealer.

The light does not turn off even

after the parking brake is released

while the engine is running.
In this case, the brakes may not

work properly and your stopping
distance will become longer. De-

press the brake pedal firmly and

bring the vehicle to an immediate
stop.

Vehicles with anti

−

lock brake sys-

tem—

The brake system warning light re-

mains on together with the “ABS”
warning light.
In this case, not only the anti

−

lock

brake system will fail but also the

vehicle will become extremely un-

stable during braking.

(b) Driver’s Seat Belt Reminder Light

and Buzzer

This light and buzzer remind you to
buckle up the driver’s seat belt.
Once the ignition key is turned to “ON”,
the reminder light flashes and buzzer

sounds if the driver’s seat belt is not fas-

tened. Unless the driver fastens the belt,
the light keeps flashing and the buzzer

stops after about 4 to 8 seconds.

(c) Front Passenger’s Seat Belt Re-

minder Light

This light reminds you to buckle up the
front passenger’s seat belt.
Once the ignition key is turned to “ON”,

the reminder light flashes if a passenger
sits in the front passenger seat and does

not fasten the seat belt.
If luggage or other load is placed on the

front passenger seat, depending on its

weight, the reminder light may come on.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands