Toyota Camry 2004 Owner'S Manual Download Page 91

Page: 91 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Canada only

Type B

For owners in Canada

The symbol on a child restraint system

indicates the presence of a lower connec-
tor system.

CHILD RESTRAINT SYSTEM
INSTALLATION
Type A—

1. Widen the clearance between the

seat cushion and seatback a little

and confirm the position of the low-
er anchorages near the button on

the seatback.

2. Latch the hooks of lower straps onto

the anchorages and tighten the lower

straps.

Type B—

1. Widen the clearance between the

seat cushion and seatback a little

and confirm the position of the low-

er anchorages near the button on
the seatback.

2. Latch the buckles onto the anchor-

ages.

If your child restraint system has a top

strap, it should be anchored. (For the
installation of the top strap, see “—Using

a top strap” on page 87 in this Section.)

For the installation details, refer to the

instruction manual equipped with each

product.

CAUTION

When using the lower anchorages
for the child restraint system, be

sure that there are no irregular ob-

jects around the anchorages or that
the seat belt is not caught.

Push and pull the child restraint

system in different directions to be
sure it is secure. Follow all the

installation instructions provided by

its manufacturer.

Do not install a child restraint sys-

tem on the rear seat if it interferes
with the lock mechanism of the

front seats. Otherwise, the child or

front seat occupant(s) may be killed
or seriously injured in case of sud-

den braking or a collision.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands