Toyota Camry 2004 Owner'S Manual Download Page 207

Page: 207 / 330

’04Camry_U (L/O 0307)

206

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Anti

−

lock brake system is not de-

signed to shorten the stopping dis-

tance: Always drive at a moderate

speed and maintain a safe distance
from the vehicle in front of you.

Compared with vehicles without an

anti

−

lock brake system, your vehicle

may require a longer stopping dis-

tance in the following cases:

Driving on rough, gravel or snow

−

covered roads.

Driving with tire chains installed.

Driving over the steps such as the

joints on the road.

Driving on roads where the road

surface is pitted or has other differ-

ences in surface height.

Install all 4 tires of specified size at

appropriate pressure: The anti

−

lock

brake system detects vehicle speeds

using the speed sensors for respec-

tive wheels’ turning speeds. The use

of tires other than specified may fail

to detect the accurate turning speed

resulting in a longer stopping dis-

tance.

Type A

Type B

“ABS” warning light (vehicles without

vehicle stability control system)

The light comes on when the ignition key
is turned to the “ON” position. If the anti

−

lock brake system works properly, the

light turns off after a few seconds. There-
after, if the system malfunctions, the light

comes on again.
When the “ABS” warning light is on (and

the brake system warning light is off), the

anti

−

lock brake system does not operate,

but the brake system still operates con-

ventionally.
When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system does not operate

so that the wheels could lock up during
a sudden braking or braking on slippery

road surfaces.

If either of the following conditions

occurs, this indicates a malfunction

somewhere in the parts monitored by
the warning light. Contact your Toyota

dealer as soon as possible to service

the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-
tion, or remains on.

The light comes on while you are driv-

ing.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands