Toyota Camry 2004 Owner'S Manual Download Page 57

Page: 57 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

The front passenger airbag will not acti-

vate if there is no passenger sitting in the

front passenger seat. However, the front

passenger airbag may deploy if luggage is

put in the seat, or the seat belt is buckled

up regardless of the presence of the oc-

cupant in the seat. (As for the front pas-

senger occupant classification system, see

“—Front passenger occupant classification

system” on page 70 in this Section.)
Always wear your seat belt properly.
Your vehicle is equipped with a crash

sensing and diagnostic module, which will

record the use of the seat belt restraint
system by the driver when the SRS front

airbags are inflated.

CAUTION

The SRS front airbag system is de-
signed only as a supplement to the

primary protection of the driver and

front passenger seat belt systems.
The driver and front passenger can

be killed or seriously injured by the

inflating airbags if they do not wear
the available seat belts properly.

During sudden braking just before

a collision, an unrestrained driver
or front passenger can move for-

ward into direct contact with or

close proximity to the airbag which
may then deploy during the colli-

sion. To ensure maximum protection

in an accident, the driver and all
passengers in the vehicle must

wear their seat belts properly. Wear-

ing a seat belt properly during an
accident reduces the chances of

death or serious injury or being

thrown out of the vehicle. For in-
structions and precautions concern-

ing the seat belt system, see “Seat

belts” on page 45 in this Section.

Improperly seated and/or restrained
infants and children can be killed

or seriously injured by the deploy-

ing airbags. An infant or child who
is too small to use a seat belt

should be properly secured using a

child restraint system. Toyota
strongly recommends that all in-

fants and children be placed in the

rear seat of the vehicle and proper-
ly restrained. The rear seat is the

safest for infants and children. For

instructions concerning the installa-
tion of a child restraint system, see

“Child restraint” on page 74 in this

Section.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands