Toyota Camry 2004 Owner'S Manual Download Page 90

Page: 90 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

4. Replace the head restraint and lift it

up to the uppermost lock position.

Lower anchorages for the child restraint

systems complying with the FMVSS225
or CMVSS210.2 specifications are

installed in the rear seat.

The anchorages are installed in the clear-

ance between the seat cushion and seat-

back of both outside rear seats.
Child restraint systems complying with the

FMVSS225 or CMVSS210.2 specification

can be fixed to these anchorages. In this
case, it is not necessary to fix the child

restraint system with a seat belt on the

vehicle.

Canada only

Type A

—Installation with child

restraint lower anchorages

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands