Toyota Camry 2004 Owner'S Manual Download Page 78

Page: 78 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

(A) INFANT SEAT INSTALLATION
An infant seat must be used in rear

−

facing position only.

CAUTION

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat even if the “AIRBAG OFF”

indicator light is illuminated. In the
event of an accident, the impact of

the rapid inflation of the front pas-

senger airbag could cause death or
serious injury to the child if the

rear

−

facing child restraint system is

installed on the front passenger
seat.

Do not install a child restraint sys-
tem on the rear seat if it interferes

with the lock mechanism of the

front seats. Otherwise, the child or
front seat occupant(s) may be killed

or seriously injured in case of sud-

den braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the rear right

seat.

—Installation with seat belt

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands