Toyota Camry 2004 Owner'S Manual Download Page 60

Page: 60 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

CAUTION

The driver or front passenger who is
too close to the steering wheel or

dashboard during airbag deployment

can be killed or seriously injured.
Toyota strongly recommends that:

The driver sit as far back as pos-

sible from the steering wheel while
still maintaining control of the ve-

hicle.

The front passenger sit as far back

as possible from the dashboard.

All vehicle occupants be properly
restrained using the available seat

belts.

For instructions and precautions con-

cerning the seating position, see

“—Front seat precautions” on page
38 in this Section.

Do not sit on the edge of the seat
or lean against the dashboard when

the vehicle is in use, since the

front passenger airbag could inflate
with considerable speed and force.

Anyone who is up against, or very

close to, an airbag when it inflates,
can be killed or seriously injured.

Sit up straight and well back in the

seat, and always use your seat belt
properly.

Toyota strongly recommends that all
infants and children be placed in

the rear seat of the vehicle and be

properly restrained.

Do not hold a child on your lap or

in your arms. Use a child restraint

system in the rear seat. For instruc-
tions concerning the installation of

a child restraint system, see “Child

restraint” on page 74 in this Sec-
tion.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands