Toyota Camry 2004 Owner'S Manual Download Page 119

Page: 119 / 330

’04Camry_U (L/O 0307)

118

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

CHECKING SERVICE REMINDER

INDICATORS (except the low fuel level

warning light and low windshield
washer fluid level warning light)

1. Apply the parking brake.
2. Open one of the doors.

The open door warning light should

come on.

3. Close the door.

The open door warning light should go

off.

4. Turn the ignition key to “ON”, but do

not start the engine.
All the service reminder indicators ex-

cept the open door warning light should

come on. The “ABS” and “VSC” warn-
ing lights, engine oil replacement

“TRAC OFF” and slip indicator lights

go off after a few seconds. The SRS
warning light goes off after about 6

seconds.

If any service reminder indicator or warn-

ing buzzer does not function as described

above, have it checked by your Toyota
dealer as soon as possible.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands