Toyota Camry 2004 Owner'S Manual Download Page 51

Page: 51 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

2. Pinch the two edges of the shoulder

belt for the rear seat outside posi-
tion with your fingers and slide the

belt past the slot of the guide as

shown above. At this time, the elas-
tic cord must be behind the seat

belt.

CAUTION

Make sure the belt is not twisted and
that it lies flat. The elastic cord must

be behind the belt and the guide

must be on the front.

3. Buckle, position and release the seat

belt. (For wearing the seat belt, see
“—Fastening front and rear seat

belts” on page 46 in this Section.)

Make sure the shoulder belt crosses
the shoulder.

REMOVING AND STORING THE

COMFORT GUIDE
Pinch the two edges of the seat belt

together so that you can slide them out
of the guide. Store the guide with the

elastic cord into the pocket.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop

while driving, remove and store the

comfort guide in its pocket when it is
not in use.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands