Toyota Camry 2004 Owner'S Manual Download Page 26

Page: 26 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Type A (to open only)

Type B (to open and close)

Automatic operation:

Type A—Push the switch completely down

and then release it. The window will fully
open. To stop the window partway, lightly

pull the switch up and then release it.
Type B—Push the switch completely down

or pull it completely up, and then release

it. The window will fully open or close. To
stop the window partway, lightly move the

switch in the opposite direction and then

release it.

Jam protection function (type B only):

During automatic closing operation or key
off closing operation, the window stops

and opens half way if something gets

caught between the window and window
frame.
If the window receives a strong impact,
this function may work even if nothing is

caught.

CAUTION

Never try jamming any part of your
body to activate the jam protection

function intentionally.

The jam protection function may
not work if something gets caught

just before the window fully closed.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands