Toyota Camry 2004 Owner'S Manual Download Page 286

Page: 286 / 330

’04Camry_U (L/O 0307)

285

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Coolant type selection

Use of improper coolants may damage

your engine cooling system.
Only use “Toyota Super Long Life Coolant”

or similar high quality ethylene glycol
based non

−

silicate, non

−

amine, non

−

nitrite,

and non

−

borate coolant with long

−

life

hybrid organic acid technology. (Coolant
with long

−

life hybrid organic acid

technology consists of the combination of

low phosphates and organic acids.)
“Toyota Super Long Life Coolant” is pre

−

mixed with 50% coolant and 50% deion-

ized water. This coolant provides protec-
tion down to about

−

C (

−

F).

NOTICE

Do not use plain water alone.

Toyota recommends “Toyota Super Long

Life Coolant” which has been tested to
ensure that it will not cause corrosion nor

result in malfunction of your engine

coolant system with proper usage. “Toyota
Super Long Life Coolant” is formulated

with long

−

life hybrid organic acid

technology and has been specifically
designed to avoid engine cooling system

malfunction on Toyota vehicles.
Please contact your Toyota dealer for

further details.

If any of the above parts are extremely

dirty or you are not sure of their condi-

tion, take your vehicle to a Toyota dealer.

CAUTION

To prevent burning yourself, be care-
ful not to touch the radiator or con-

denser when the engine is hot.

NOTICE

To prevent damage to the radiator
and condenser, do not perform the

work by yourself.

Checking the radiator and

condenser

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands