Toyota Camry 2004 Owner'S Manual Download Page 45

Page: 45 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

NOTICE

Do not put unevenly weighed ob-
jects on the seat and do not stick

sharp objects (needles, nails, etc.)

into the seat.

When cleaning the seats, do not

use organic substances (paint thin-

ner, benzine, alcohol, gasoline,
etc.). They may damage the heater

and seat surface.

To prevent the battery from being

discharged, turn the switch off

when the engine is not running.

Front

Rear

For your safety and comfort, adjust the

head restraint before driving.

To raise: Pull it up.
To lower: Push it down while pressing the

lock release button.
The head restraint is most effective when

it is close to your head. Therefore, using

a cushion on the seatback is not recom-
mended.

CAUTION

Adjust the center of the head re-
straint so that it is closest to the

top of your ears.

After adjusting the head restraint,
make sure it is locked in position.

Do not drive with the head re-
straints removed.

Head restraints

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands