Toyota Camry 2004 Owner'S Manual Download Page 83

Page: 83 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Move seat

fully back

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.

Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,

because the front passenger airbag

could inflate with considerable

speed and force. Otherwise, the

child may be killed or seriously in-

jured.

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or

any part of his/her body against the
door or the area of the seat, front

or rear pillar or roof side rail from

which the side airbags or curtain
shield airbags deploy even if the

child is seated in the child restraint

system. It is dangerous if the side
airbag and curtain shield airbag in-

flate, and the impact could cause

death or serious injury to the child.

Do not install a child restraint sys-
tem on the rear seat if it interferes

with the lock mechanism of the

front seats. Otherwise, the child or
front seat occupant(s) may be killed

or seriously injured in case of sud-

den braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the rear right

seat.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands