Toyota Camry 2004 Owner'S Manual Download Page 190

Page: 190 / 330

’04Camry_U (L/O 0307)

189

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

(c) Erasing the entire HomeLink

memory (all three programs)

To erase all previously programmed codes

at one time, press and hold down the 2

outside buttons for 20 seconds until the

indicator light flashes.
If you sell your vehicle, be sure to erase

the programs stored in the HomeLink

memory.

CAUTION

When programming the HomeLink

Universal Transceiver, you may be

operating a garage door or other

device. Make sure people and ob-

jects are out of the way of the ga-

rage door or other device to pre-

vent potential harm or damage.

Do not use this HomeLink

Univer-

sal Transceiver with any garage

door opener that lacks the safety

stop and reverse feature as re-

quired by federal safety standards.

(This includes any garage door

opener model manufactured before

April 1, 1982.) A garage door open-

er which cannot detect an object

(signaling the door to stop and re-

verse), does not meet current feder-

al safety standards. Using a garage

door opener without these features

increases risk of serious injury or

death.

This device complies with FCC Rules
Part 15. Operation is subject to the fol-

lowing two conditions: (1) This device

may not cause harmful interference, and
(2) this device must accept any interfer-

ence that may be received, including

interference that may cause undesired
operation.

WARNING: This transmitter has been

tested and complies with FCC and
DOC/MPAC rules. Changes or modifi-

cations not expressly approved by the

party responsible for compliance
could void the user’s authority to op-

erate the device.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands