Toyota Camry 2004 Owner'S Manual Download Page 229

Page: 229 / 330

’04Camry_U (L/O 0307)

228

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

DINGHY TOWING TIPS
Before dinghy towing, be sure to ob-

serve the following in order to reduce
the damage to your vehicle.

1. Put the shift lever in neutral.
2. Turn the ignition switch to the “ACC”

position. Make sure the audio is turned

off and any item is not plugged into
the power outlet.

NOTICE

To avoid the locking of the steering
wheel, turn the ignition switch to the

“ACC” position.

3. Release the parking brake.

After dinghy towing, let the engine idle for
more than 3 minutes before driving the

vehicle.

NOTICE

Do not tow your vehicle from the
rear. This may cause serious damage

to your vehicle.

Your vehicle is designed primarily as a

passenger

−

carrying vehicle. Towing a

trailer will have an adverse effect on
handling, performance, braking, durability

and driving economy (fuel consumption,

etc.). Your safety and satisfaction depend
on the proper use of correct equipment

and cautious driving habits. For your

safety and the safety of others, you must
not overload your vehicle or trailer. Toyota

warranties do not apply to damage or

malfunction caused by towing a trailer for
commercial purposes. Ask your local

Toyota dealer for further details before

towing.

NOTICE

When towing a trailer, be sure to con-
sult your Toyota dealer for further in-

formation on additional requirements

such as a towing kit, etc.

Trailer towing

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands