Toyota Camry 2004 Owner'S Manual Download Page 293

Page: 293 / 330

’04Camry_U (L/O 0307)

292

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

With a spare tire of the same
wheel type as the installed tires

With a spare tire of different
wheel type from the installed
tires

To equalize the wear and help ex-

tend tire life, Toyota recommends

that you rotate your tires accord-

ing to the maintenance schedule.

(For scheduled maintenance infor-

mation, please refer to the “Sched-

uled Maintenance Guide” or “Own-

er’s Manual Supplement”.)

However, the most appropriate tim-

ing for tire rotation may vary ac-

cording to your driving habits and

road surface conditions.

See “If you have a flat tire” on page

243 in Section 4 for tire change proce-

dure.
When rotating tires, check for uneven

wear and damage. Abnormal wear is

usually caused by incorrect tire pres-

sure, improper wheel alignment, out

−

balance wheels, or severe braking.

Rotating tires

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands