Toyota Camry 2004 Owner'S Manual Download Page 246

Page: 246 / 330

’04Camry_U (L/O 0307)

245

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

The standard tire should be re-

paired and reinstalled as soon

as possible.

Avoid sudden acceleration,

sudden deceleration and sharp

turns with the compact spare

tire.

NOTICE

Your ground clearance is re-

duced when the compact spare

tire is installed so avoid driving

over obstacles and drive slowly

on rough, unpaved roads and

speed bumps. Also, do not at-

tempt to go through an auto-

matic car wash as the vehicle

may get caught, resulting in

damage.

With a compact spare tire

Without a compact spare tire

1. Get the required tools and

spare tire.

1. Jack handle

2. Wheel nut wrench

3. Front towing eyelet

(on some models)

4. Jack

5. Spare tire

To prepare yourself for an emergency,

you should familiarize yourself with

the use of the jack, each of the tools

and their storage locations.

—Required tools and spare

tire

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands