Toyota Camry 2004 Owner'S Manual Download Page 70

Page: 70 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

This warning light system monitors the

airbag sensor assembly, front airbag sen-

sors, side and curtain shield airbag sen-
sors, curtain shield airbag sensors, driv-

er’s seat position sensor, driver’s seat belt

buckle switch, front passenger occupant
classification system, “AIRBAG ON” indi-

cator light, “AIRBAG OFF” indicator light,

front passenger’s seat belt buckle switch,
seat belt pretensioner assemblies, inflat-

ors, warning light, interconnecting wiring

and power sources. (For details, see “Ser-
vice reminder indicators and warning buzz-

ers” on page 111 in Section 1

−

6.)

If any of the following conditions occurs,
this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your

Toyota dealer as soon as possible.

When the ignition key is turned to the

“ON” position, the light does not come
on or remains on for more than about

6 seconds.

The light comes on while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

Any of the SRS side airbags and cur-
tain shield airbags have been inflated.

The portion of the doors (shaded in the
illustration) was involved in an accident

that was not severe enough to cause

the SRS side airbags and curtain
shield airbags to inflate.

The surface of the seats with the side

airbag (shaded in the illustration) is
scratched, cracked, or otherwise dam-

aged.

The portion of the front pillars, rear

pillars or roof side rail garnishes (pad-

ding) containing the curtain shield air-
bags inside (shaded in the illustration)

is scratched, cracked, or otherwise

damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands