Toyota Camry 2004 Owner'S Manual Download Page 64

Page: 64 / 330

’04Camry_U (L/O 0307)

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Your vehicle is equipped with a crash

sensing and diagnostic module, which will

record the use of the seat belt restraint
system by the driver when the SRS side

airbags and curtain shield airbags are in-

flated.

CAUTION

The SRS side airbag and curtain
shield airbag system is designed

only as a supplement to the prima-

ry protection of the driver, and
front passenger and rear outside

passenger seat belt systems. To en-

sure maximum protection in an ac-
cident, the driver and all passen-

gers in the vehicle must wear their

seat belts properly. Wearing a seat
belt properly during an accident re-

duces the chances of death or seri-

ous injury or being thrown out of
the vehicle. For instructions and

precautions concerning the seat

belt system, see “Seat belts” on
page 45 in this Section.

Do not allow anyone to lean his/her
head or any part of his/her body

against the door or the area of the

seat, pillar, rear pillar or roof side
rail from which the SRS side airbag

and curtain shield airbag deploy

even if he/she is a child seated in
the child restraint system. It is dan-

gerous if the SRS side airbag and

curtain shield airbag inflate, and the
impact of the deploying airbag

could cause death or serious injury

to the occupant.

Improperly seated and/or restrained
infants and children can be killed

or seriously injured by the deploy-

ing airbags. An infant or child who
is too small to use a seat belt

should be properly secured using a

child restraint system. Toyota
strongly recommends that all in-

fants and children be placed in the

rear seats of the vehicle and prop-
erly restrained. The rear seats are

the safest for infants and children.

For instructions concerning the
installation of a child restraint sys-

tem, see “Child restraint” on page

74 in this Section.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands