Toyota Camry 2004 Owner'S Manual Download Page 182

Page: 182 / 330

’04Camry_U (L/O 0307)

181

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

4. Average vehicle speed

(“AVG. MPH” or “AVG. KM/h”)

Average vehicle speed is calculated and
displayed based on total driving dis-

tance and total driving time with the

engine running.

The displayed value is updated every 10

seconds.
To reset the calculations, push and hold

the “MODE/RESET” button for more than

1 second.

5. Driving time

(“E/T”)

The elapsed time after the engine starts

is displayed.

When the engine is started, driving time

is counted from 0:00. Up to 99:59 (99

hours, 59 minutes) can be displayed.
When the driving time exceeds 99:59, the

counter returns to 0:00.
To reset the calculations, push and hold

the “MODE/RESET” button for more than

1 second.

The direction is indicated on the inside

rear view mirror.

If the ignition switch was turned off with

the system on, the system will automati-
cally turn back on when the ignition switch

is turned on.
Push the “COMP” switch to turn the com-
pass system on and off.

The compass indicates the direction

that the vehicle is heading. In the

above case, it shows that the vehicle is
heading north.

Displays

Directions

North

Northeast

East

Southeast

South

Southwest

West

Northwest

The compass may not show the correct
direction in the following conditions:

The vehicle is stopped immediately af-
ter turning.

The compass does not adjust while the

vehicle is stopped.

The ignition switch is turned off imme-

diately after turning.

The vehicle is on an inclined surface.

Compass

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands