Toyota Camry 2004 Owner'S Manual Download Page 212

Page: 212 / 330

’04Camry_U (L/O 0307)

211

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

This illustration indicates typical tire

symbols.

1. Tire size—

For details, see “—Tire

size” on page 213.

2. DOT and Tire Identification

Number (TIN)—

For details, see

“—DOT and Tire Identification

Number (TIN)” on page 212.

3. Uniform tire quality gra-

ding—

For details, see “Uniform

tire quality grading” that follows.

4. The location of the tread wear

indicators—

For details, see

“Checking and replacing tires” on

page 290.

5. Tire ply composition and mate-

rials—

Plies mean a layer of rub-

ber

−

coated parallel cords. Cords

mean the strands forming the plies

in the tire.

6. Radial tires or bias

−

ply tires—

radial tire has “RADIAL” on the

sidewall. The tire not marked with

“RADIAL” is a bias

−

ply tire.

Tire information—

—Tire symbols

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands