Toyota Camry 2004 Owner'S Manual Download Page 117

Page: 117 / 330

’04Camry_U (L/O 0307)

116

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

Vehicles with vehicle stability control sys-

tem—
The light comes on when the ignition key
is turned to the “ON” position. If the anti

−

lock brake system and the brake assist

system work properly, the light turns off
after a few seconds. Thereafter, if either

of the systems malfunctions, the light

comes on again.
When the “ABS” warning light is on (and

the brake system warning light is off), the
anti

−

lock brake system, the brake assist

system, traction control system and the

vehicle stability control system do not op-
erate, but the brake system still operates

conventionally.
When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden brake or braking on slippery

road surfaces.

If either of the following conditions

occurs, this indicates a malfunction

somewhere in the parts monitored by
the warning light. Contact your Toyota

dealer as soon as possible to service

the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the brake system warn-

ing light, immediately stop your ve-

hicle at a safe place and contact your
Toyota dealer.
In this case, not only the anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

(i) Open Door Warning Light

This light remains on until all the doors

are completely closed.

(j) SRS Warning Light
This light will come on when the igni-

tion key is turned to the “ON” position.
After about 6 seconds, the light will go

off. This means the systems of the air-

bag and front seat belt pretensioner are
operating properly.

This warning light system monitors the
airbag sensor assembly, front airbag sen-

sors, side and curtain shield airbag sen-

sors, curtain shield airbag sensors, driv-
er’s seat position sensor, driver’s seat belt

buckle switch, front passenger occupant

classification system, “AIRBAG ON” indi-
cator light, “AIRBAG OFF” indicator light,

front passenger’s seat belt buckle switch,

seat belt pretensioner assemblies, inflat-
ors, warning light, interconnecting wiring

and power sources.
If either of the following conditions occurs,

this indicates a malfunction somewhere in

the parts monitored by the warning light
system. Contact your Toyota dealer as

soon as possible to service the vehicle.

The light does not come on when the
ignition key is turned to the “ON” posi-

tion or remains on for more than about

6 seconds.

The light comes on while driving.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands