Toyota Camry 2004 Owner'S Manual Download Page 245

Page: 245 / 330

’04Camry_U (L/O 0307)

244

2004 CAMRY from Jul. ’03 Prod. (OM33616U)

NOTICE

Do not continue driving with a

deflated tire. Driving even a

short distance can damage a

tire and wheel beyond repair.

Compact spare tire (on some mod-

els)
The compact spare tire is designed

for temporary emergency use only.

The compact spare tire is identified

by the distinctive wording

“TEMPORARY USE ONLY” molded

into the side wall of the tire.
The compact spare tire saves space

in your luggage compartment, and its

lighter weight helps to improve fuel

economy and permits easier installa-

tion in case of a flat tire.

The compact spare tire can be used

many times, if necessary. It has tread

life of up to 4800 km (3000 miles) de-

pending on road conditions and your

driving habits. When tread wear indi-

cators appear on the tire, replace the

tire.
See also the tire information on page

287 in Section 7

−

2 for details on the

tread wear indicators and other ser-

vice information.

CAUTION

The compact spare tire was de-

signed especially for your Toy-

ota. Do not use it on any other

vehicle.

Do not use more than one com-

pact spare tire at the same

time.

The pressure for the compact

spare tire must be 420 kPa (4.2

kgf/cm

or bar, 60 psi).

Do not exceed 80 km/h (50

mph) when driving with the

compact spare tire.

Summary of Contents for Camry 2004











































































































































































































































































































































Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands

Toyota Camry 2004, Owner'S Manual

Search results

Summary of Contents for Camry 2004

Reviews:

Related manuals for Camry 2004

Brands by name

Popular brands