Toshiba e-studio 211c, Operator'S Manual

Page: 25 / 225

1
2
3
4
5
6
7
8
9
10
11
12
1-10
BEFORE MAKING COPIES
3. ENERGY-SAVING FUNCTIONS
Off-mode (Base model)
The power switch of the copier automatically shuts off when the copier is not being used for a certain
period of time. The default setting is “OFF”, however, the period of time until the switch is turned OFF is
selectable between 3 and 240 minutes on the “AUTO SHUTOFF” menu.
Setting the off-mode
Page 6-34
Sleep mode (When the copier is used also as a printer)
This function allows the copier automatically to cut off the unnecessary electricity to the fuser unit when
the copier is not being used for a certain period of time and to stand by with the minimum power
consumption. The default setting is “OFF”, however, the period of time until the copier goes into the
sleep mode is selectable between 3 and 240 minutes on the “AUTO SHUTOFF” menu.
Setting the off-mode
Page 6-34
Energy saving mode (When the copier is used also as a printer)
This function allows the copier automatically to lower the fuser unit temperature to stand by with the
minimum power consumption when the copier is not being used for a certain period of time. The default
setting is “OFF”, however, the period of time until the copier goes into the energy-saving mode is
selectable between 3 and 60 minutes on the “ENERGY SAVE” menu.
Setting the energy save mode
Page 6-33
ENERGY SAVER time < AUTO SHUTOFF time
The copier goes into the energy saving mode, then the off-mode or sleep mode.
ENERGY SAVER time AUTO SHUTOFF time
The setting of the off-mode or sleep mode takes precedence and the energy saving mode setting be-
comes invalid.
Power consumption and warm-up time at energy saving mode
- Power consumption and warm-up time are the actual measurements made according to Toshiba’s
method of measuring.
- The initial (default) setting of the energy saving mode is Level 1. You can switch the level depending on the
user’s environment. User selection Page 6-17
*1 With full options: Reversing automatic document feeder, automatic duplexer, finisher, large-capacity
feeder, hole punch unit, drawer modules
Mode
Power Consumption
Without
option
With full
options
*1
Efficiency
Warm-up time
Without
option
With full
options
*1
Energy saving
mode
Level 1 Approx.100W
Level 2
Normal standby
Approx. 2 min. 30 sec.
0
Approx. 56 %
0 % 0 %
Approx.135W
Approx.160W
Approx. 48 %
Approx. 29 % Approx. 25 % Approx. 1min. 15 sec. Approx.195W
Approx.225W
Approx.260W
Power consumption: Average power per hour