Toshiba e-studio 211c Operator'S Manual Download Page 176

Page: 176 / 225

9-7

When the toner bag becomes full of used toner, the REPLACE

TONER BAG

symbol flashes, and this message appears:

Dispose of used toner

Press HELP

4. REPLACE TONER BAG SYMBOL

Open the front covers in the order of to

Remove the used toner bag from the copier in the

direction of the arrow.

Caution

NEVER attempt to incinerate toner bags. This could cause an
explosion.
DO NOT dispose of used toner bags.
Your service technician will collect them.

Close the used toner bag.

- The cap is provided on the used toner bag.

- Please return all used toner bags to your service technician.

Summary of Contents for e-studio 211c


































































































































































































































Search results

Summary of Contents for e-studio 211c

Reviews:

Related manuals for e-studio 211c

Brands by name

Popular brands

Toshiba e-studio 211c, Operator'S Manual

Search results

Summary of Contents for e-studio 211c

Reviews:

Related manuals for e-studio 211c

Brands by name

Popular brands