Toshiba e-studio 211c Operator'S Manual Download Page 164

Page: 164 / 225

8-27

Set the FTP password and FTP path as in the same

manner as FTP user name.

- Enter the FTP password within 128 letters and enter the

FTP path within 128 letters.

- For the FTP path, specify the directory path on the FTP

server to save the scanned data.

For example, to specify the “ftp://192.168.1.1/ftp-dir/temp”

FTP folder in the FTP server, enter “ftp-dir/temp”.

Maximum 50 scan user names can be registered.

Setting the Scan User

Perform steps 1 to 3 in page 8-23.

Press the SCAN USER SETTING key.

Press the NEW key.

Confirm the contents filled in, then press the SET key.

- The setting is completed.

Summary of Contents for e-studio 211c


































































































































































































































Search results

Summary of Contents for e-studio 211c

Reviews:

Related manuals for e-studio 211c

Brands by name

Popular brands

Toshiba e-studio 211c, Operator'S Manual

Search results

Summary of Contents for e-studio 211c

Reviews:

Related manuals for e-studio 211c

Brands by name

Popular brands