Removing the Engine (continued)
6. Disconnect the electrical system wiring from the engine:
• The engine wire harness connector at the main wire harness (left side
of engine). Check the engine and the harness connector for damage or
corrosion and clean or repair as necessary.
• The wire harness ground at the engine (near front left engine mount).
7. Disconnect the choke cable from the engine.
8. Remove the clamp securing the engine oil drain hose to the right side battery
tray.
9. If the engine is being removed from the machine separately, proceed to
of this procedure. If the entire engine frame assembly (including the
starter/generator) is being removed:
Greensmaster® eTriFlex 3360 and 3370
Page 4–13
Engine (Model 04580): Service and Repairs
19239SL Rev B
