Disassembling the Cutting Unit Motor
g289205
Figure 109
1.
Cap screw (12 each)
6.
Rotor
11.
Output gear
2.
Motor cover
7.
Bearing (2 each)
12.
Gear box cover
3.
O-ring
8.
O-ring (2 each)
13.
Lip seal
4.
Wave washer (2 each)
9.
Housing assembly
14.
O-ring
5.
Bearing (2 each)
10.
O-ring
Note:
If the motor housing, stator, controller or cable is damaged, cutting
reel motor replacement is necessary as these components are not available
separately.
Use of the cutting unit motor rotor tool part number TOR6028 is recommended
for this procedure; refer to
Cutting Unit Motor Rotor Tool (page 2–18)
.
IMPORTANT
When servicing the cutting unit motor, use a clean work space with a
non-metal surface. The motor rotor includes very powerful magnets
that can cause the rotor to move unexpectedly if working on a metal
surface. Also, any metallic debris that gets attracted to the rotor can
damage the motor after assembly.
Refer to
for this procedure.
Electrical System: Service and Repairs
Page 5–138
Greensmaster® eTriFlex 3360 and 3370
19239SL Rev B
