Installing the Engine (continued)
g286602
Figure 19
1.
Engine
3.
Set screw (2 each)
2.
Engine pulley
4.
Square key
CAUTION
The engine assembly weighs approximately 42 kg (92 lb). Use an
appropriate lift to install the engine assembly.
IMPORTANT
Make sure to not damage the engine, fuel or vent hoses, oil drain
hose, electrical harnesses, control cables or other parts while
installing the engine.
2. Secure the engine to the engine frame with the 4 cap screws previously
removed.
3. Remove the front engine lift lug and reinstall the fastener used to secure the
lift lug to the engine; refer to
.
4. Secure the drip pan to the engine frame.
5. Fit the starter/generator drive belt over the engine pulley and adjust the drive
belt tension; refer to
Adjusting the Starter/Generator Drive Belt Tension
(Model 04580) (page 5–20)
.
Greensmaster® eTriFlex 3360 and 3370
Page 4–17
Engine (Model 04580): Service and Repairs
19239SL Rev B
